How to cut men’s hair at home

To save time and money on beauty, you can do women’s or men’s haircuts in different types with a few simple techniques at home.

You may find yourself in a situation where you do not want to go to the hairdresser due to financial issues or even boredom and you are under the control of someone who is going to cut your hair no matter what you say. The house will help you.

Haircuts with various models can change people’s faces. If you want to do this short at home and do not pay for it, you can use simple techniques, some of which we will teach you in this part of the world of wet fashion.

Umbrella hair


Trimming your hair yourself is a great way to change your face and sometimes there is no need to go to a beauty salon.

The tools needed to do this are:
the shoulder
Mirror
Tresses
scissor
Special cape


How to do it:


First of all, dry your hair. Wet hair does not do your job well because it piles up the hair and you do not know exactly how much to cut.
Then use them to separate your hair. Completely separate the parts you do not want and attach it to the back of your head with clips.
The umbrella part is the only thing that should be hung and left without a pin. You need to decide exactly how much you want to cut your hair. For example, if you want the bangs to be up to your eyebrows, comb your hair down to completely straighten your hair, then hold it in place and cut with scissors.
Divide the lower part of the umbrellas into two groups and cut each part separately.
Then comb your hair again to make sure the two parts of the bangs are exactly the same.

Simple shortcoming


A simple short is usually up to the shoulders or longer. In general, you should learn to part and cut your hair properly. The technique we describe in this section shortens your hair by about 2.5 cm. If you are looking for something more than this short amount, you should visit the hairdresser.

How to plop hair

ingredients:
the shoulder
Mirror
Elastic hair
scissor
Hairdressing gown
How to do it:
Wash and condition your hair.
Then comb your entire hair and let it straighten completely.
Make sure your hair is moisturized.
Stand in front of it.
Bend your head and pull the whole hair forward and tie the hair in the shape of a ponytail from the front with elastic or the same elastic.
The cache should be close to your forehead.
Now you have to comb the ponytail again.
Now you have to decide how much you want to cut your hair at the end, now hold your finger like a seven and hold the desired part for a short time with your hands.
Keep the upper part of your finger straight and use your fingers as a guide.

Short professional method


Cut the front of the hair

  1. Straighten the hair completely with an iron, in this short time, it does not matter if the hair is dry or wet, but the main goal is to straighten the hair as much as possible.
  2. With a comb, separate the front hairs from the back, with the border behind the ears. Do not manipulate the head difference.
  3. Hold one side of the hair with the help of a comb and hold it high with your index finger and your middle. Then lower your fingers to the point where you want to cut the hair.
  4. Now that you have cut one side of your hair, use it to determine the height of the other side.
  5. To notice the changes and further coordination of the two sides of the hair, gently bring both sides forward and compare.
  6. If you do not like the shortness of smoothness, chop the inside of both sides with the tip of scissors and vertically.

Trim the back of the hair

  1. Divide the hair on the back of the head.
  2. To separate the back of the hair, consider a line from the top of one ear to the top of the other ear, and tie the rest of the hair up with clips.
  3. Then divide this layer into two separate parts from the middle and bring it to the front of your shoulders to compare with the shortness of the front of the hair and use it as a guide.
  4. Shorten the back a little longer than the front and the cut line should be smooth, because then the desired changes can be applied.
  5. Open the part that you closed with clips, and divide it in two in the middle, and complete the short according to the parts that you have shortened before.

“Bob” hairstyle


Tie your hair from the back, tightly, below the forehead line and exactly in the middle of the ponytail.
Cut a little below the hairline in a straight line with hairdressing scissors to shorten your hair to the comb.
After opening the ponytail, your bob hairstyle is complete.
If the straight line of the scissors is not to your taste, bend the head slightly forward and hold the scissors vertically towards the ends of the hair and start tipping.
Get rid of hair follicles
Conjunctivitis can damage your hair, so it’s best to get rid of conjunctivitis.

In order to get rid of frizz, you should not cut your hair short, but it is better to use scissors to keep calm and be tempted and just get rid of frizzy hair.

Men’s shorts

  1. First you have to choose a hairstyle for yourself. If this is the first time you have cut your hair short, choose a simple model.
  2. Before cutting your hair, consider the following points:
    Before using the shaving machine, go to the manual and learn how to work with it, turn it on and off, change the speed, remove the guard and put it in place, change the blades, and so on. ..
    Always cut your hair longer than necessary so that if things do not go according to plan, you have a chance to come back.
  3. Comb from both sides of the head to the ears and part the hair where you feel the curvature of the head.
  4. Choose a small size protector to adjust the amount of hair that is cut short.
  5. Cut the hair in the opposite direction of growth and from bottom to top.
  6. Shorten the bottom of the hair a little more.
  7. Go to the back of the hair and with a hand mirror, cut the hair behind your head from bottom to top. Shorten the bottom of the hair a little more. Note that it is necessary to match the short back with the short armpit.
  8. Feed the hair (shade). To do this, the height of the upper and lower part of the hair must be different and a border must appear between the short and long part of the hair. This feed should be perfectly symmetrical around the head. To feed, you must select a size of protector that is between the sizes of the two heights.
  9. Use a brush to cut the top of the hair or use your hands to lift the hair and cut the hair gently and carefully into six-millimeter pieces so that these cuts are parallel to your forehead line. .
  10. Be more careful in shortening the front parts because these parts are more visible.
  11. When you are done, remove a layer perpendicular to your forehead line from your hair and pull it upwards. All heights of this layer must be equal. Gently cut the crown of your hair.
  12. Trim your beard with a razor or mower. To do this, start from the bottom of your ears. But if you want a shorter beard, start with the dimple below your cheek.
  13. Comb from the top of the head to the sides with a comb and cut the extra hair with scissors.
  14. Brush the hair on the back of your neck using a hand mirror to see the back of your head and a mower or razor.
  15. After a short time, wet your hair and comb it and style it.

Short with a weight or clipper


This type of short is probably one of the easiest types of shorts at home. If you do not have a clipper, be sure to get it for this type of short. There are different types of them in the market.

Required accessories:

  • Clipper with guard
  • Mirror
  • Pin
  • scissor
  • the shoulder
  • Hairdressing cape


How to do it:
Start with dry hair.
Now fasten your hair with a pin.
Stand in front of it or make a hand mirror.
Try the clipper with the largest guard that has the largest number. Smaller numbers make hair shorter. Use 3 or 4 guards for normal size. If you do not use a guard or protector, you may shave completely and become bald.
Attach the selected guard to the clipper and insert it upwards into your hair and start from the base of the neck. Do this for all directions.
Now start cutting your hair from the top of your head. If you feel that the shortened size is small, use other sizes.
Now, after finishing the work with the clipper, take a pair of scissors and smooth the irregular parts completely.